kläropro
The industrial wastewater treatment plant

The wastewater treatment plant for hotels, industrial and gastronomic use

kläropro wastewater treatment plants are special plants for object-related application, in which cases no standardized wastewater treatment plants can be realized. Especially for objects with very special wastewaters or strongly fluctuation inflow amounts, kläropro wastewater treatment plants are the right choice.

This type of wastewater treatment plant is based on our standardized modular system; however, the single modules will be adapted to the respective application individually.

Applications of the wastewater treatment plant

Thanks to our experience with the realization of special plants, which we collected over the years, our utp wastewater specialists always find the right solution for you.

As divers the applications, as elaborate and well-engineered is the solution with kläropro.
kläropro wastewater treatment plants are used at:

  • hotels and recreational facilities
  • restaurants and clubhouses, with or without kitchen facilities
  • butchers and meat processing factories
  • fish processing factories
  • sports bars with alternating operation
  • camping sites
  • commercial and industrial companies etc.

The Technology

Functionality of the wastewater treatment plant

The functionality of our kläropro wastewater treatment plants is based on the SBR process. However, we adjust individual modules according to the specification (e.g. elevated organic load) of the local conditions.

Thereby we fall back on additional components like for example a precipitation or nutrients dosage. This way no kläropro wastewater treatment plant is like the other. We calculate, plan and produce every plant every plant individually according to the required filtration values.

 

Objectives:

  • wastewater treatment for the discharge in a receiving water, a lake or the underground
  • wastewater processing for the reuse as service water (e.g. for the garden irrigation or the toilette flush, etc.)
  • preparing the wastewater for the reuse as process water
  • considerable handling and protection of the resources

Project course when building a kläropro wastewater treatment plant

During the project course of kläropro wastewater treatment plants we put great emphasis on an expert supervision and individual solutions.

There are a lot of planning activities involved when it comes to the new construction or renovation of a wastewater treatment plant. In addition, many issues must be clarified. Right from the start, it is important to receive professional advice and supervision. Therefore, our utp team is at your side with its expertise from the first planning to the support when the construction of the plant is finished. We see ourselves as long-term partners.

The existing situation: Requirements for the wastewater treatment plant

First, we have to determine the amounts and loads that are discharged to the wastewater treatment plant as well as the filtration level that has to be reached.
Gladly we support you with combing through the files and documents.
Subsequently we have to define the future location of the plant and determine the condition of the site (pipe run and topography).
After we determined the existing situation, we will go on to the next step.

Develop concepts

Now we ask, “which structure for the wastewater treatment plant is best for the given circumstances?”. After we determined the existing situation, we start with the drawing board in order to create concepts.
With new constructions, we develop different proposals and versions. Which type of tank should you opt for? How to arrange the tanks on site?
If there are already existing tanks on site, we will try and integrate them into the new concept of the plant. Mostly it is possible to integrate the tanks completely or just add new ones. A renovation or integration often is the most cost-effective solution. After all, the existing tanks are very often still in a good condition.
As kläropro wastewater treatment plants are used with very specific wastewaters, we also examine the site where the wastewater accrues. Depending on the location, we record the operating procedures, make tests and analyses in the laboratory or install test wastewater treatment plants on site.

Profitability assessment

This is about the money and therefore one of the most important topics.
We present our developed concepts to you or the responsible decision-makers, disclose numbers, respond to questions und will find the most cost-effective solution for you.

Planning phase of the wastewater treatment plant

The critical phase starts as soon as we have determined how the wastewater treatment plant is going to be. We gladly prepare the applications for a building permit and the water rights on site.
We also create all for the construction of the wastewater treatment plant necessary drawings and plans, carry out construction consultations, prepare tender specifications und gladly make construction timetables for you.
At the same time, we schedule the plant for production. On principle we produce everything ourselves. From the treatment tanks to the SBR kit and the control unit. The advantage for you is that short-term changes or special wishes pose no problem for us.

Delivery and installing of the wastewater treatment plant

After the quality control at the factory, the tested plant will be delivered to the construction site. Our service team will gladly do the installation competently for you on site.
In addition, a ready-to-use delivery does not pose a problem for us. Our team can also realise the overall performance with earthworks or for example the renovation of existing tanks.
After the commissioning, the test phase and technical acceptance of the wastewater treatment plant we also stand at your side and are at your disposal as competent partner.

Variations of kläropro

 

klärcontrol control unit

As a standard, all our kläropro wastewater treatment plants are equipped with our user-friendly klärcontrol control technology.
The control unit has a hydrocontrol module for the continuous, hydrostatic and maintenance-free air measurement in the control cabinet. Hereby an automatic optimization of the runtimes of the compressors regarding the changing occurrence of wastewater is made possible; this increases the energy efficiency and optimizes the cleaning performance.
The function monitoring with alarm function takes place not only visual and acoustic but also by means of our telemetry module for remote monitoring, which once more increases the operational reliability significantly.
In order to make a more-line operation (several reactors) possible, the control units communicate with each other. Thus, an even organic as well as hydraulic load for the reactor can be guaranteed.

PLC control unit with touch panel

All kläropro wastewater treatment plants are available with a Siemens S7 PLC control unit. The PLC control unit enables the integration into an existing control system via mobile communication or a landline for the remote monitoring and controlling.
The filling level measurement in the respective tanks takes place with a level sensor.
The graphic presentation of the structure of the plant in the touch panel enables the user-friendly operation.
Of course, many different additional functions like an oxygen measurement, trend display, and many more are possible.

Control cabinets

We realise control cabinets for kläropro for the interior as well as the outdoor area. Anytime we respond to technical and constructional requirements and of course to the wishes of our customers.

Depending on the wishes of the customer, we deliver various indoor cabinets for wall installation or freestanding inside an operations building.

We offer freestanding cabinets in a range of different materials like concrete, aluminium or glass fibre reinforced plastics. Of course, we also try to fulfil special wishes for example like wooden lagging.

Operation buildings

Classically stonewalled

Upon request, we take care of the construction of a new operations building for major projects. Whether made of wood or classically stonewalled – we realise your wish.

 

Technics cubicle as prefabricated part

Does an operations building not yet exist, we deliver completely ready-to-use concrete prefabricated parts as technics cubicle. Those are not only equipped with the tested wastewater treatment technology, but also contain various parts like screw screen, washroom or lounge room or even a whole wastewater laboratory.

 

Technology containers

Technology containers are also no problem for us. They will be delivered ready-to-use and tested to the construction site.

 

Additional models

Precipitation

Precipitation is a process, in which a solved substance will be transferred wholly or partly into an insoluble precipitation in the form of crystals, flocks or drops.
For this purpose, a special precipitation will be added by means of a dosage pump to the treatment plant. Thanks to our modular system, a precipitation can be retrofitted even after years uncomplicatedly.

UV module for hygienization

For disinfection, or rather the removal of germs, our type H module for hygienization is used. The already biologically cleaned wastewater is led through an additional UV reactor housing and irradiated. By means of a particularly effective UVC radiation, microorganisms will safely be killed.
Our type H module distinguishes itself by its compact and space-saving construction. Completely without chemicals und with extremely low-maintenance technology, we reach bathing water quality.

On site control points

In order to design the wastewater treatment plant more user-friendly, there is the possibility to set up on site control points. From there, the plant can be operated from outside the operations building with only a few buttons pressed.

Flow meter (MID)

Often a flow meter in combination with a throttle drainage is required officially. Gladly we integrate a flow meter (magnetically inductive flow meter) into the treatment technology. In doing so, the cleaned wastewater flows through a measurement device, that shows the drained off water amounts.
Furthermore, our klärcontrol control unit can remotely transmit on a daily basis all recorded water quantities of water.

Mechanical pre-cleaning / removal of coarse materials

A mechanical pre-cleaning for bigger wastewater treatment plants is reasonable. We gladly deliver and install therefore a screw screen that separates coarse materials from the wastewater.
The screening material reaches directly and without contact to the environment a rubbish bin.

Selected references

Request an offer

You are planning a project and need first, non-commiting information?
Request your individual offer and talk to our competent employees for further information.